ติดต่อลูกค้าสัมพันธ์ :095-5425121      095-5485121
ดอกแกะสลักหรือดอกกัดหรือเครื่องมือดอกแกะสลัก     (   ช่วงปลาย   2 เกลียว   )  ---  ดอกแกะสลัก        หรือดอกกัด         หรือเครื่องมือดอกแกะสลัก   CNC Router   ( 2  รอบ  ร่องเกลียว)
  • ดอกแกะสลักหรือดอกกัดหรือเครื่องมือดอกแกะสลัก     (   ช่วงปลาย   2 เกลียว   )  ---  ดอกแกะสลัก        หรือดอกกัด         หรือเครื่องมือดอกแกะสลัก   CNC Router   ( 2  รอบ  ร่องเกลียว)
  • ดอกแกะสลักหรือดอกกัดหรือเครื่องมือดอกแกะสลัก     (   ช่วงปลาย   2 เกลียว   )  ---  ดอกแกะสลัก        หรือดอกกัด         หรือเครื่องมือดอกแกะสลัก   CNC Router   ( 2  รอบ  ร่องเกลียว)

See larger image and other views (with zoom)

ดอกแกะสลักหรือดอกกัดหรือเครื่องมือดอกแกะสลัก ( ช่วงปลาย 2 เกลียว ) --- ดอกแกะสลัก หรือดอกกัด หรือเครื่องมือดอกแกะสลัก CNC Router ( 2 รอบ ร่องเกลียว)

 

รหัสสินค้า:EC-S2LX

Buyer Protection


ดอกแกะสลักหรือดอกกัดหรือเครื่องมือดอกแกะสลัก (   ช่วงปลาย   2 เกลียว   )

การประยุกต์ใช้งานของวัสดุ : ชุด N และชุด A มีความแข็งแกร่งที่ดี สำหรับ กระบวนการประมวผล เจาะะ ,แกะสลัก ถึง 45HRC ,ชุด  AA มีความแข็งแกร่งที่ดี สำหรับกระบวนการประมวลผล เจาะ ,แกะสลักถึง  50HRC และสุดท้าย ชุด 3A มีความแข็งแกร่งที่ดี สำหรับ กระบวนการประมวผล เจาะะ ,แกะสลัก ถึง 60 HRC



รายละเอียดชุดอุปกรณ์สำหรับการแกะสลัก :

ขึ้นอยู่กับความต้องการของตลาด โดยเรามีดอกมีดแกะสลัก ที่หลากหลาย สำหรับรองรับความต้องการ ทั้งในด้านความแตกต่างทั้งทางด้านราคา  รวมถึงความแตกต่างในด้านคุณภาพ รายการด้านล่างดังต่อไปนี้คือ อุปกรณ์สำหรับการแกะสลัก ทั้งหมด 5 ชุด , ชุด N, A, AA, AAA ซึ่งเป็นอุปกรณ์การแกะสลัก ที่ผลิตขึ้นจาก ของแข็งแร่ธาตุคาร์บอน (แร่ทังสเตน) และดอกมีดแกะสลักชุดอื่นๆ คือดอกมีดแกะสลัก ชุดเพชร


 

ชุด (3 A ) AAA

• อุปกรณ์แกะสลักชุดนี้ เป็นอุปกรณ์การแกะสลักขั้นสูง ซึ่งเปิดตัวเมื่อวันที่ 1 เดือนพฤษภาคม2009  ซึ่งผลิตขึ้นจากวัสดุที่มีความคุณภาพเหนือชั้นกว่า เมื่อเปรียบเทียบกับรุ่นที่ผลิตขึ้นก่อนหน้านี้   

• ซึ่งได้รับการพัฒนาปรับปรุงให้มีคุณภาพที่ดี ยิ่งขึ้นอย่างมาก โดยมีความทนทานต่อการแตกหัก รวมถึงมีความทนทานต่อรอยขีดข่วน 

•โดยกระบวนการความสามารถทางเทคนิค ของอุปกรณ์แกะสลัก ชุด AAA นี้มีความเป็นมืออาชีพมากกว่า ซึ่งชนิดของการประยุกต์ใช้งาน สำหรับ คริลิค, พลาสติก,MDF, ไม้เนื้อแข็ง, PC,ABS, PVC, อลูมิเนียมทองแดง,สแตนเลส รวมถึงอื่นๆอีกมากมาย


 

ชุดAA

• ผลิตจาก เหล็กทังสเตน  ไมครอนแบบพิเศษ

• เป็นเครื่องมืออุปกรณ์การแกะสลัก ชนิดที่มีความแม่นยำ  รวมถึงมีคุณภาพสูง  

• มีความแข็งแรงสูงสุดถึง 94 HRC รวมถึงมีคุณสมบัติสามารถต้านท้านต่อการโค้งอเป็นอย่างมาก สำหรับการฝนขัดถูในกระบวนการแกะสลัก รวมถึงมีความแข็งแรงทนทานสูงกว่า วัสดุคาร์ไบด์ที่เป็นของแข็งชนิดอื่นๆ

• ในด้านราคาที่สูงของวัสดุนี้  อันเนื่องมาจากอุปกรณ์เครื่องมือ แกะสลักสลักชุดนี้มี ความยาว ส่วนท้าย SHK ถึง 6 ม.ม.มาพร้อมด้วยกับการจดสิทธิบัตรของกระบวนการ ฝนแกะสลัก ซึ่งเป็นอุปกรณ์แกะสลักที่มีความแหลมคมรวมถึงมีความแข็งแรงเป็นอย่างมาก

• อุปกรณ์ดอกมีด แกะสลักชุดนี้มีควมเหมาะสม  เป็นอย่างดีเยี่ยมสำหรับการแกะสลัก อลูมิเนียม สแตนเลส รวมถึงเหล็ก

• เหมาะสมอย่างดีเยี่ยมสำหรับ กระบวนการเครื่องจักรประกอบหัตถกรรม รวมถึงให้คุณภาพที่ดีเยี่ยม สำหรับกลุ่มสินค้า  อะคริลิ, MDFรวมถึงอลูมิเนียม

• อุปกรณ์แกะสลักชุดAA นี้เป็นอุปกรณ์แกะสลักอันดับ 1 ซึ่งเป็นชุดที่ให้ผลลัพธ์ ของผลผลิตที่ยอดเยี่ยมภายหลังจากการลงทุน เนื่องด้วยระยะเวลา 3 ปีของการออกแบบ พัฒนา รวมถึงปรับปรุง ผลิตภัณฑ์

รวมถึงอุปกรณ์ แกะสลักชุดAA นี้ มีคุณภาพที่เหนือกว่า อุปกรณ์แกะสลัก ของ ยุโรป และ อเมริกัน


ชุด A

•ผลิตจากวัสดุเม็ดคาร์ไบด์ที่เป็นของแข็ง  K200 ไมโคร

•โดยจุดมุงหมายของอุปกรณ์แกะสลักชุดนี้คือราคาที่ไม่แพงแต่ให้คุณภาพระดับที่สูงโดยลูกค้าทั้งหมดผู้ที่ซึ่งเลือกใช้อุปกรณ์ดอกมีดแกะสลักชุดนี้ต่างมีความประหลาดใจในด้านประสิทธิภาพที่ดีเยี่ยมรวมถึงผลประโยชน์ที่สูงของด้านผลผลิต


ชุด N

•อุปกรณ์แกะสลักชุดN เป็นอุปกรณ์การแกะสลักชนิดที่เป็นที่นิยมอย่างกว้างขวางผลิตขึ้นจากวัสดุเม็ดคาร์ไบด์ที่เป็นของแข็ง  K10  ไมโคร

•เมื่อนำอุปกรณ์ดอกมีดแกะสลักชุดนี้ของโรงงานเราออกจำหน่ายในวันแรกๆพร้อมด้วยมาตรวัดนั้นได้ให้ปริมาณการแกะสลัก       รวมถึงยอดขายที่ประสบความสำเร็จบรรลุเป้าอย่างโดดเด่นซึ่งมันให้คุณภาพที่ดีเยี่ยมรวมถึงราคาที่ต่ำสามารถตอบสนองต่อความต้องการของการแกะสลักที่ต้องการฐานลูกค้าส่วนมากเป็นอย่างดี  


ชุดเพรช 

•อุปกรณ์แกะสลักชุดเพรชนี้ได้รับการออกแบบรวมถึงพัฒนาขึ้นสำหรับการแกะสลักอลูมิเนียม, ทองเหลือง, เหล็ก, อะคริลิค      และหินอ่อน

•อุปกรณ์แกะสลักชุดเพรชนี้มีความแข็งอย่างดีเยี่ยม, ซึ่งมีความทนทานต่อการขูดถลอกขัดถูในกระบวนการแกะสลักรวมถึงให้การประมวลผลการแกะสลักที่มีคุณภาพดีแต่ไม่สามารถใช้ทดแทนอุปกรณ์แกะสลักซึ่งผลิตจากคาร์ไบด์ที่เป็นของแข็ง

• ส่วนในเรื่องการแข่งขันในด้านราคาอุปกรณ์แกะสลักชุดเพรชนี้มีราคาที่สูงกว่าอุปกรณ์แกะสลักชุดอื่นๆ

 

 

 

 

ดอกแกะสลักหรือดอกกัดหรือเครื่องมือดอกแกะสลัก   CNC Router   ( 2  รอบ  ร่องเกลียว   )

มีเส้นผ่านศูนย์กลาง  Shrank  ที่  :0.16" / 0.24" / 0.32" / 0.39" / 0.47" / 0.55" / 0.63" / 0.71" / 0.79" (4mm / 6mm / 8mm / 10mm / 12mm / 14mm / 16mm / 18mm / 20mm)

  

เกี่ยวกับวัสดุ : เรามีวัสดุสำหรับนำเสนอ 4 ชนิดคือ N, A, AA, 3A,

-วัสดุ ชุด N ผลิตจากวัสดุเหล็ก ทังสแตน ผลิตจากประเทศจีน  ซึ่งมีผลระดับความแข็งแรงถึง 88-89HRA  (การทดสอบความแข็งร็อคเวลล์ A สเกล)

-วัสดุ ชุด A ซีเอ็นซี เราเตอร์ บิต ผลิตจากวัสดุ  เหล็ก ทังสแตน จากประเทศไต๋หวั่น ซึ่งมีระดับความแข็งแรงถึง 90-91HRA ,ผลกระบวนการทดสอบความแข็งแรงของวัสดุคือ 45 HRC

-วัสดุ ชุด AA ซีเอ็นซี เราเตอร์ บิต ผลิตจาก เหล็กทังสแตน เยอรมัน ซึ่งมีระดับความแข็งแรงถึง 93-94HRA ,ผลกระบวนการทดสอบความแข็งแรงของวัสดุ 50 HRC

-วัสดุ ชุด 3A ซีเอ็นซี เราเตอร์ บิต ผลิตจากวัสดุเหล็ก ทังสแตน คุณภาพดีเยี่ยม ซึ่งมีระดับความแข็งแรงถึง 96 HRA ,ผลกระบวนการทดสอบความแข็งแรงของวัสดุ 60 HRC

วัสดุคุณภาพดี มีความแข็งแรงสูง และมีความทนทานอย่างดีเยี่ยม เช่นเดียวกับอายุการใช้งานของวัสดุที่ยาวนาน

ระดับผลการทดสอบความแข็งแรงของวัสดุ ไม่ได้มีการบิตเบือนข้อเท็จจริงจากกระบวนการทดสอบจริง เพื่อให้ได้ผลข้อมูลที่ดีที่สุด เกินความเป็นจริง

 

และด้วยความคมของใบมีดที่ใช้ขัดแกะสลักพื้นผิววัสดุส่งผลให้ประสิทธิภาพของการประมวลงานแกะสลักออกมามีประสิทธิภาพที่ดีเยี่ยม

 
 
 
รายละเอียด:
CED: เส้นผ่าศูนย์กลางขอบตัด ;
CEL: ความยาวขอบตัด
OVL: ความยาวโดยรวม
SHK: เส้นผ่านศูนย์กลาง  Shank 

 

 

 

 

 

Imported Tungsten Steel Solid Carbide Two Flutes Spiral End Mills CNC Router Bits, Double Flutes Milling Cutter
Two Spiral Flute End Mills

Applicational materials: N and A series are good for processing rigidity up to 45HRC, AA series are good for processing rigidity up to 50HRC, 3A are good for processing rigidity up to HRC60.

Series Engraving Tools Introduction:
Depending on market demand, we will provide you with a variety of cutters with different price and quality. Bellowing are five series of engraving tool. N, A, AA, AAA series are made from solid carbide(tungsten), and the other series is diamond cutters.

3A (AAA) Series
• This series bits are the most advanced tool at present, which was put out on May, 1st, 2009. Its materials are the best ones comparing with previous materials.
• Its abrasion resistance and break resistance are largely improved.
• As for the process technique, AAA series is more professional, which is mainly applied for acrylic, plastic, MDF, hardwood, PC, ABS, PVC, aluminum, copper, stainless steel and so on.

AA Series
• Be made from ultra-micron tungsten steel.
• It’s a kind of precise engraving tools with high quality.
• Featuring hardness of 94 HRC and super resistance to bend, its resistance to rub and stability are superior to other solid carbide materials.
• Because of the high cost of the materials, the longest SHK of this series is 6mm. With the patent polishing process; the cutting tools are very sharp.
• Engraving tools are excellent in engraving aluminum, stainless steel, steel.
• Mills are excellent in processing rate and quality among acrylic, MDF and aluminum.
• AA series is the top engraving tools consequent to A series after great investment and three years’ design, development and improvement. Its quality is superior to European and American ones.

A Series
• Adopts K200 Micro grain solid carbide.
• A series is a kind of cutting tools targeted at low-cost high-quality, customers who have used these tools are all amazed by its high efficiency and high benefits.

N Series
• N series is a kind of popular engraving tools adopts K10 micro grain solid carbide.
• Put out by our factory in the early days. With engraving measurement and outstanding sales achievements, its excellent quality and low price meet the engraving need of most customers.

Diamond Series
• Diamond engraving tools are designed and developed to cut aluminum, brass, steel, acrylic and marble.
• It has great hardness, abrasive resistance and processing quality, which can not be substituted by solid carbide.
• The price is competitive higher than other cutters.

 

 

Imported Tungsten Steel Solid Carbide Two Flutes Spiral End Mills CNC Router Bits, Double Flutes Milling Cutter
Available Shrank Diameter: 0.16" / 0.24" / 0.32" / 0.39" / 0.47" / 0.55" / 0.63" / 0.71" / 0.79" (4mm / 6mm / 8mm / 10mm / 12mm / 14mm / 16mm / 18mm / 20mm);

Materials:

At present, we have A, AA, 3A, 3 kinds of materials. 
· The A series cnc router bits are made of tungsten steel material from Taiwan and their rigidity at 90-91HRA., HRC of material to be processed is 45.
· The AA series cnc router bits stand for German ultrafine tungsten steel and rigidity is at 93-94HRA, HRC of material to be processed is 50.
· The  3A series cnc router bits stand for German best quality ultrafine tungsten steel and rigidity is at around 96HRA. HRC of material to be processed is 60.
Tips:
The better quality of material is, the higher rigidity and durability as well as materially longer lifespan. 
The stronger rigidity it is, the bits won’t distort during process and give better processing effect. 
And the more fine tungsten steel’s particle is, the sharp bits of the blade polished as a result for better processing effect.

Specification:

CED: Cutting Edge Diameter;
CEL: Cutting Edge Length;
OVL: Overall Length;
SHK: Shank Diameter

Model  /  รุ่น   CED(mm) CEL(mm) SHK(mm) OVL(mm)
EC-S2LX01 1 3 4 50
EC-S2LX015 1.5 4 4 50
EC-S2LX02 2 6 4 50
EC-S2LX025 2.5 8 4 50
EC-S2LX03 3 8 4 50
EC-S2LX035 3.5 10 4 50
EC-S2LX04 4 10 4 50
ECS-2LX05 5 13 6 50
EC-S2LX06 6 15 6 50
EC-S2LX08 8 20 8 60
EC-S2LX10 10 25 10 75
EC-S2LX12 12 30 12 75
EC-S2LX14 14 35 14 80
EC-S2LX16 16 45 16 100
EC-S2LX18 18 45 18 100
EC-S2LX20 20 45 20 100

 

  • ทั้งหมด
  • คำแนะนำ
  • รายละเอียดสินค้า
  • การส่งสินค้า
  • การชำระเงิน
  • อื่น ๆ
ถามคำถาม

เลือกหัวข้อ:

รายละเอียดสินค้า การส่งสินค้า การชำระเงิน อื่น ๆ


Content:


แนบไฟล์:

Preview Size State Operation


รหัสยืนยัน:

การส่งสินค้า :
We ship to more than 200 countries and 300 ports worldwide!
By Express: 3-5 business days
By Sea: 20-60 business days
How much to ship to
my place?
การชำระเงิน:
T/T Bank Transfer:
:
:

Video Guide:

Related Categories

เข้าสู่ระบบ E-mail สำหรับข้อเสนอพิเศษ

อัพเดท ส่วนลด ข้อเสนอพิเศษ รายการฟรี และ รางวัลเงินสด

หาข้อมูลเพิ่มเติม>>

ดูโปรโมชั่นของเราในสัปดาห์นี้.

www.Sign-in-Thai.com, It is the biggest online supplier of sign products in Thailand and specialized in providing One Stop Solution for customers to select AD equipments, AD consuming materials, sign exhibition products, etc. We have set up overseas branches in 6 foreign countries in order to provide better service for our customers all over the world. Our products cover all field of the AD and signage and all the products we supply are made in accordance with international quality standards as a result that, at present, we have more than 9,000 products online for sale. Since we implement the centralized purchasing, all the products are quoted with competitive prices and good quality.