ติดต่อลูกค้าสัมพันธ์ :095-5425121      095-5485121
พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM
  • พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM

See larger image and other views (with zoom)

พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์ Reci W4/S4 100 - 130W CO2 พลังงาน 220V --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM

 

รหัสสินค้า:CS-PS-DY13-220V

  • ราคา : ฿ 10,136 - 11,518/set   (ขอส่วนลดพิเศษ) (สินค้าถึงภายใน 15-20 วัน)

    ราคาขายส่ง :
    • จำนวน (sets) ส่วนลด Amount/set
      1. 1 0% ฿11,518
      2. 2 - 4 3% ฿11,172
      3. 5 - 10 12% ฿10,136
    • Need more quantities, please click Bulk Order
  • กรุณาเลือกประเภท
    220V
  • จำนวน: set(s) Total Cost: ฿11,518
  • น้ำหนักการส่ง: 7.7lb (3.5kg) freightขนส่งสินค้า

  • inquire

Buyer Protection


พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V

เครื่องหมาย & รุ่น   : DY13, ขนาดเล็ก, สามารถตอบสนองได้อย่างรวดเร็วเหมาะสำหรับหลอดเลเซอร์  Reci W4 / S4 / W2 / S2

แหล่งที่มาสินค้า:   เอเชียและประเทศจีนพื้นที่แปซิฟิก  

มาตรฐานคุณภาพ:   ระดับมาตรฐานสากล   

 

H.S. การจำแนกประเภท: เครื่องจักรและอิเล็กทรอนิกส์,  อิเล็กฯ. องค์ประกอบ  8541 อุปกรณ์กึ่งตัวนำชิ้นส่วนอะไหล่ไดโอดเปล่งแสง

คำแนะนำ:

พาวเวอร์ซัพพลายใช้สำหรับหลอดเลเซอร์  Reci, EFR และหลอดเลเซอร์ WEEGIANT หากคุณต้องการใช้มันทำงานกับ        หลอดเลเซอร์แบรนด์อื่นๆโปรดตรวจสอบข้อกำหนดก่อนสั่งซื้อ

 

 

 

 

Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM

Mark & model: DY13, small size, quick response, it is suitable for Reci W4 / S4 / W2 / S2 laser tube.

Origin: Asia and Pacific Area China
Quality standard: International
H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts.

Warm tips:
The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order.

 
คุณสมบัติ:
พาวเวอร์ซัพพลายนี้ / ผ่านการออกแบบที่มีความบางซึ่งมีรูปร่างที่บางซึ่งถูกออกแบบมาเป็นพิเศษสำหรับหลอดเลเซอร์ชนิดพิเศษ
ซึ่งพาวเวอร์ซัพพลายนี้ช่วยทำให้หลอดเลเซอร์ส่งออกพลังงานได้มากและให้พลังงานที่มั่นคงมากยิ่งขึ้น
ให้การตอบสนองอย่างรวดเร็ว: สามารถขยายพลังงานเลเซอร์และช่วยยืดอายุการใช้งานของหลอดเลเซอร์ได้  
ควบคุมง่าย: สามารถควบคุมการเริ่มต้นและการหยุดของเลเซอร์ได้ง่ายโดยใช้ระดับ TTL
ซึ่งพาวเวอร์ซัพพลายนี้มีการป้องกันการเปิดวงจรส่งออก  
พาวเวอร์ซัพพลายนี้มีตัวแสดงสัญญาณ TTL , สัญญาณผ่านน้ำและการแสดงผลสัญญาณเลเซอร์
ซึ่งพาวเวอร์ซัพพลายนี้มีปุ่ม BUTTON เพื่อทดสอบว่าทำงานได้ถูกต้องหรือไม่
การประยุกต์ใช้งาน:   สำหรับสร้างประติมากรรมและใช้ตัดอะคริลิค, ผ้า,  แผ่นสีคู่และยาง ฯลฯ
เราติดฟิล์มป้องกันในพาวเวอร์ซัพพลายเพื่อป้องกันไม่ให้ชิ้นส่วนโลหะขูดขีด
 
 
 
 
Features:
This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube.
The power supply / power source makes laser tube output larger and more stable.
Quick Response: It can enlarge laser power and prolong laser tube‘s service life.
Easy Control: The start and stop of laser can be easily controlled by TTL level.
This power supply / power source has output open circuit protection.
This power supply / power source has TTL signal indication, water through signal indication and laser output indication.
This power supply / power source has the BUTTON to test it work properly.
Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc
We stick the protection film on the power source to prevent the metal parts of the scrape!







 
 
I. Instruction for sub - connection wire of the control end
 

 

คำแนะนำในการเดินสายไฟ

①   ส่วนท้ายที่ 1  เป็นแหล่งจ่ายไฟ 5V ( ไม่จำเป็นต้องใช้เมื่อเชื่อมต่อแผ่นคาร์ดินัลเบียร์  (cardinal plate.) ) ใช้สำหรับควบคุมพลังงานด้วยเครื่องโพเทนชิโอมิเตอร์และกระแสไฟ 5V ควรมีค่าน้อยกว่า 10 mA

② TH. TL หมายถึง  ระดับพลังงานที่สูงและต่ำตามลำดับและ WP หมายถึง การป้องกันน้ำ 

③ส่วนท้าย  5 G หมายถึง ground และ 6 หมายถึงปลายอินพุต

④เมื่อเชื่อมต่อแผ่นควบคุมให้เชื่อมต่อสัญญาณแสงที่มีส่วนท้ายที่ 2 ในกรณีของแสงระดับพลังงานสูง ~ ของการเปล่งแสง (     ส่วนท้ายที่ 3 แสงระดับพลังงานต่ำ ~ ของการเปล่งแสง) เชื่อมต่อ ground~wire  กับส่วนท้ายที่ 5 เชื่อมต่อท้ายที่ 6  พร้อมสัญญาณอนาล็อกควบคุมไฟฟ้าและทำการทดสอบฟฟ้าลัดวงจรสำหรับส่วนท้ายที่ 4 และที่ 5

 PWM    ยังสามารถนำมาใช้ในส่วนท้ายที่ 6 แต่คลื่นความถี่สูงสุดจำเป็นต้องถึง  5V และความถี่ควรจะมากกว่า  20K  

 ⑥ สำหรับการทดสอบ:    การลัดวงจร 3, 4    และ  5  ( หรือที่ 4, 5  การลัดวงจรและ 3, 5  เชื่อมต่อกับสวิตช์ )  ศูนย์กลาง         โพเทนชิออมิเตอร์จะเชื่อมต่อกับ  6 IN และปลายอื่นๆ อีก   2 จะเชื่อมต่อกับ 5V และ  ground (1 และ 5) ตามลำดับ

 ⑦ระดับพลังงานสูงที่ควบคุมแสง 1  และ 2 จะเชื่อมต่อกันและ  4 กับ 5 จะป้องกันน้ำ

⑧ไม่ได้เสนอให้ควบคุมพลังงานเลเซอร์ด้วยการปรับคลื่นความถี่สูงเพราะจะส่งผลต่ออายุการใช้งานของเลเซอร์

 ⑨แบบจำลองสามารถใช้ได้กับหลอดเลเซอร์ Z2 จำเป็นต้องปรับและใช้กระแสไฟฟ้าตามคำแนะนำของหลอดเลเซอร์
⑩ แอมป์มิเตอร์เชื่อมต่อกับสายขั้วลบ
 
 
 
 
1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 
2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 
3) Footer 5 G refers to ground and 6 refers to input end. 
4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5.
5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K.
6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 
7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection.
8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser.
9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 
10) The ammeter is concatenated to the cathode line.  

II. Instruction for power wire
หมายเหตุ:     ตาราง 10A  หมายถึงความต้องการของสายเชื่อมต่อสายไฟ     
แต่ไม่ใช่การกระจายพลังงานที่แท้จริง
 
 
III   คำแนะนำสำหรับเชื่อมต่อเลเซอร์เข้ากับสายไฟ    
1) ขั้วบวกเส้นสีแดงพร้อมกับกระแสไฟฟ้าแรงสูงเชื่อมต่อเข้ากับหางเลเซอร์
2) ขั้วลบเส้นสีขาวเชื่อมต่อเข้ากับช่องส่งออกพลังงานเลเซอร์
 
 
IV ข้อจำกัดกระแสไฟฟ้าหมุนเวียน  
( เพื่อจำกัดกระแสการทำงาน, โพเทนชิโอมิเตอร์ -  เส้นที่อยู่ด้านล่างของพาวเวอร์ซัพพลายควรจะหมุนทวนเข็มนาฬิกา (โปรดดูแผนผังวงจร       ในเว็บไซต์ของเรา)   การจำกัดพลังงานส่งออกหมุนเวียนสูงสุดตามที่ได้กำหนดไว้ในคู่มือการใช้งานกระแสไฟฟ้าหมุนเวียนที่ใช้งานควรถูกจำกัดก่อนการส่งมอบ
 
 
V. อัตราเส้นตรงระหว่างสัญญาณอินพุตกับกระแสไฟฟ้าเอาท์พุต   
หมุนรอบโพเทนชิออมิเตอร์     
ขนาดเส้นจะเปลี่ยนไป: ยกตัวอย่างเช่น  เมื่อสัญญาณอินพุตเป็น 0-5V กระแสไฟฟ้าเอาต์พุตจะอยู่ที่ 0 - 32mA    หรือเมื่อสัญญาณอินพุตเป็น     0 - 2V    สัญญาณเอาต์พุตคือ    0 - 32mA
หมายเหตุ: เมื่อโพเทนชิโอมิเตอร์ลดลงมากจนเกินไปกระแสไฟฟ้าส่งออกที่แท้จริงจะถูกลดลงมาจากสัญญาณนำเข้าเช่นเดียวกัน
 
 
VI. การใช้กระแสไฟฟ้า   
มาตรฐานการใช้งานสำหรับพาวเวอร์ซัพพลายโดยอยู่ภายใต้พลังงาน  220V, 50Hz ความผันผวนของพลังงานไฟฟ้าอินพุตและคลื่นความถี่           จะส่งผลต่อกระแสไฟฟ้าของการทำงานจากพาวเวอร์ซัพพลายผลกระทบคือความสัมพัทธ์เชิงเส้นความไม่มั่นคงของกระแสไฟฟ้านำเข้าจะส่งผลต่อพลังงานส่งออกของหลอดเลเซอร์ความผันผวนของกระแสไฟฟ้านำเข้าไม่ส่งผลกระทบต่ออายุการใช้งานของเลเซอร์หากกระแสไฟฟ้าที่ให้โดยพาวเวอร์ซัพพลายไม่เกินขีดจำกัดของกระแสไฟฟ้า 
 
 
 
 
 
 
Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. 

III. Instruction for laser connection wire 
1) The positive red - line with high voltage is connected to the laser tail
2) The negative white - line is connected to laser output window

IV. Current limitation
To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery.

V. Linear scale between input signal and the output current
Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA.
Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. 
 
VI. Using current
The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation.


Quality Report:
 
1. I don’t know this website well, how can I trust you?
2. Not clear about the Price Policy of Sign-in-Thai.com?
3. How to pay? Can I use credit card?
4. Is it safe to pay online? Will it occur any security problems concerning my personal information?
Quick Inquiry for This Product
พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์    Reci W4/S4 100 - 130W CO2   พลังงาน  220V  --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM

พาวเวอร์ซัพพลายสำหรับหลอดเลเซอร์ Reci W4/S4 100 - 130W CO2 พลังงาน 220V --- Reci W4/S4 100 - 130W CO2 Laser Tube Power Supply / Power Source, 220V, OEM

฿10,136 - 11,518/set

ขั้นต่ำให้การสั้งซื้อ : 1 set

  • *Business E-mail:
  • *ชื่อ:
  • โทรศัพท์:
  • +86(10) 6370-5868
  • *Message:
  • Characters:20(Min.) - 2000(Max.)
  • *Verification code:

การส่งสินค้า :
We ship to more than 200 countries and 300 ports worldwide!
By Express: 3-5 business days
By Sea: 20-60 business days
How much to ship to
my place?
การชำระเงิน:
T/T Bank Transfer:
:
:

Video Guide:

เข้าสู่ระบบ E-mail สำหรับข้อเสนอพิเศษ

อัพเดท ส่วนลด ข้อเสนอพิเศษ รายการฟรี และ รางวัลเงินสด

หาข้อมูลเพิ่มเติม>>

ดูโปรโมชั่นของเราในสัปดาห์นี้.

www.Sign-in-Thai.com, It is the biggest online supplier of sign products in Thailand and specialized in providing One Stop Solution for customers to select AD equipments, AD consuming materials, sign exhibition products, etc. We have set up overseas branches in 6 foreign countries in order to provide better service for our customers all over the world. Our products cover all field of the AD and signage and all the products we supply are made in accordance with international quality standards as a result that, at present, we have more than 9,000 products online for sale. Since we implement the centralized purchasing, all the products are quoted with competitive prices and good quality.