Screen Printing Rubber Silicone Strip Cutter

See larger image and other views (with zoom)

Screen Printing Rubber Silicone Strip Cutter

รหัสสินค้า:SPM-TJ-SPE-QGQ

ราคา Unit : ฿ 2,370/set (ขอส่วนลดพิเศษ) (สินค้าถึงภายใน 14-20 วัน)

จำนวน: set(s) Total Cost:
THB ฿2,370
น้ำหนักการส่ง: 5.5lb (2.5kg) ขนส่งสินค้า
item added to cart

0 total in your Cart, Cart Total: ฿

seller assumes all responsibility for this listing

Shipping and handling

จำนวน: ประเทศ:

1. If you choose to ship by Express, you can see the shipping fee is a little High, but it can deliver to your door within 3-5 days, you need only to make the payment and wait.
2.If you choose to ship by sea, the shipping fee is lower, and you need to go to the ports to make the clearance at the Customs, and take the good from the port to your home by yourself.Generally it takes from10 to 30 days, depending on the consignee address.

Handling time

Will usually ship within 3 business days of receiving cleared payment.

Ship from where?

We have 4 overseas warehouses all over the world now including: Russia, USA, Brazil and Mexico. and We are setting up another one in Europe. Normally, we will ship your order from the nearest warehouse to you. if the stock near you is sold out, we will ship your order to you directly from china.

Return policy

Purchases can be returned under the following conditions:: 1) There are quality problems after opening the package.; 2) Products are different than on the order list.; 3) Products are irreparably damaged during transportation.

Payment details

Payment method

1.Paypal (online payment)
2.Creidit card
3.Bank Transfer (T/T)
4.Western Union online/offline payment

Transaction History

Transactions: 0

Screen Printing Rubber Silicone Strip Cutter

This cutter is mainly used for cutting all kinds of silk screen scraping strips, all kinds of rubber, silica gel strips, round rods and other soft materials. The fixed clamp fix the cutting materials. Special high strength stainless steel slice cutting knife is used for cutting.Small force, precise cutting size, smooth cutting surface.
This cutter adopts splint structure, clip the rubber strip on the shelf, and there is a 3mm cutting groove between the splint on both sides. The cutting can be completed by pushing and pulling along the cutting groove with a special knife.
Methods of Use and Notes:
1.Place the cutting material in the splint; Turn the handle to clip the rubber slightly(note: do not clip too tight, too tight will cause extra cutting force due to the cutting process of the cut material can not be slightly extended on both sides).
2.For soft and small cutting materials, push and pull to cut directly.
3.For the hard, large cutting material, you can apply lubricating oil (Petroleum jelly, oil, butter, peanut oil and other lubrication characteristics can be) on the blade, and then it is easy to push and pull the cutting back and forth.
4.The cutter is equipped with a stainless steel cutting knife with sharp edge, knife face thin, 90 mm below the knife face, plane v-knife face from the edge to the top is 3.5""/90 mm, the top knife width of only 0.05""/2 mm, the knife body thin is most suitable for a certain amount of flexibility of the various strips, bar cutting. (the common blade in the market is v-shaped 0.4""-0.6""/10-15mm, and the blade face is inverted u-shaped. The cutting thickness suddenly increases from the upper end of v-shaped blade, making cutting extremely laboriously)
5.The cutter is equipped with power handle, which can cut with both hands more quickly and less labor.
6.The height of the cutting platform splint is 2.3"" /58mm (the height of cutting material is suitable for less than 2""/55mm), the width of both sides is 3""/80mm, and the cutting groove (gap) between the splint on both sides is 0.1""/3mm; Minimum cutting thickness is 0.1""/3 mm, maximum cutting thickness is 1.1""/30 mm.
Package:
Gross weight:5.5 lb /2.5 kg
Packing size:13 x 8.5 x 5 inch/33 x 21.5 x 13 cm