What size should I prepare my image for printing?

ควบคุม ที่เกี่ยวข้อง

• What is a thermal printhead?
• How do printheads work?
• What is the average thermal printhead life?
• How can I maximize the life of my printhead?
• How do I clean my printhead?
• How do I replace my thermal printhead?
• How does a Canon Printhead work?
• How do I know I may need to replace my print head?
• Why would the print head have problems?
• When should I use a RIP?
• What is the maximum width of printing?
• When it is necessary to use laminate?
• What is the definition of a vehicle wrap?
• What is the vehicle wrap printing process like?
• How is the wrap applied to the vehicle?
• How much ink does each compatible refillable cartridge hold?
• How do we replace the ink?
• Screen displays "Cartridge Set" or "NO Cartridge"
• The screen diaplays "Wrong Cartridge"
• Displays error code "XX03 Replace" (Happen in HP products)
• Displays "NON.ORIGINAL INK"
• How long time can I store the printer without printing?
• How many T-shirts can be printed in a day with your A2 size flatbed printer?
• What"s the features of the digital flatbed printing?
• What"s the difference between digital flatbed printing and screen printing?
• How to start custom flatbed printing business?
• Is DTG digital garment printing FASTER than Screen Printing?
• How does the printer connect to the computer?
• I"ve used an Epson 2200 for several years. Suddenly, today, it is only showing 4 paper types in the printer paper settings (Plain Paper, Enhanced Matte, Velvet Fine Art, and WaterColor Paper. I uninstalled the printer, drivers, and everything else. After reinstalling all the paper selections were in the list, initially. Then, a few minutes later, I returned to the printer settings and only the above four papers were listed. Any thoughts on what is going on? Thanks!
• Hi group, Has anyone had any experience printing transparent material with 2200? It"s my understanding that the inks need to be dye-based not pigment based. Parrot Digigraphic in Boston makes Clear Transparency for Pigment and I"m wondering this would fit the bill. thanks,
• Need something that"ll print 11x17 with Post Script. Should I go inkjet or laser?
• Hi i am currently using Photoshop and a basic Epson printer for doing my separations my printer is only a4 is it possible to split my one colour image over say two sheets and join them together there is no half tone in the image if so how do you do it or do I have to go out and get an a3 printer.
• I have no idea where to start. Is there a certain printer and transparency films and inks that i should use? i have an hp photosmart 3210 All-in-one printer.
• Ive been perusing the forums here trying to find info that would help me to choose a printer for making positives, and i could use a little advice. I"m currently favoring the Epson 1400, and also considering investing in the Easy Flow ink system. my questions are: 1. Does the Epson 1400 have a transparency setting, or some other setting suitable for opaque positives, right out of the box? 1a. I"ve been reading up on RIP software, but i currently only print block or line-art style designs, and i
• While I"m aware that laser printers are ideal for printing film positives, I"ve read they are achievable from Inkjet printers with some adjustments. I own an HP (wideformat) Designjet 70. Do I need to purchase rip software or would converting images to halftones in Photoshop be sufficient? What kind of vellum or film would be preferable and do I need to use a certain type of ink? Any suggestions would be greatly appreciated. Thanks!
• I have read countless threads on printing these, but I am still freakin lost.. I keep reading "get fast rip with an r1800!" That"d be nice and all.. but I (just like many other people starting out) cant go this route due to expenses! Does anyone have any suggestions on a decent printer? (I will eventually get an 1800.. but Yeah.. I don"t have the cash at the moment :P). Thank you to all! Also, I"m not looking to do halftones or anything fancy yet.. I just want to find a printer that fits my budg
• I decided to take on a project for my hockey team. I order custom heat transfers (digital) from Transfer Express and my old high school teacher is letting me use his HIX HT-400 heat press. My question is this, it is an old model, meaning it does not have digital display just a 0-10 knob for heat (with readout) and a timer. How does one set the pressure on a machine like this? I did not see any pressure adjustments. Also, any tips for a first timer doing this? I will be transferring to a red pol
• Hello fellow sublimaters, I am doing some sublimation printing on coffee mugs and I have followed the vendors instructions to the letter on setting time and temp, however, it seems that every time I print, the sublimation paper burns.I turned down the temp and increased the time, but the paper still burns. I have swapped out the mug heat press several times, even used a different manufaturer for the paper and the mug press and still burns the paper.Any suggesitons from the forum? thanks
• my partner and myself are new to screen printing and attempted our first screen burning this afternoon. We built our own light box with 6 20-watt white blacklight bulbs and it worked like a charm. Now, the problem we ran into is we had our image printed at Kinko"s on transparency sheets, which we"ve read that plenty of people do. We didn"t do a negative of the image like we"ve read about cause only doing a single color (white) ink we figured that the plane image would burn out the clear and the
• Was wondering what the best paper is to use for Sublimation using an Epson C88 printer and Sublijet R Inks? Will be doing mugs and plates/ornaments.
• Hi everyone, I"m brand spankin" new to sublimation. I just purchased two Epson C120 printers, one equipped with CIS dye sub ink. I want to do mugs, tshirts, tote bags, keychains and calendars.These are my questions:I purchased T-Shirt transfer paper from PrintOnIt. Can I use this same transfer paper for my mugs as I do for T-Shirts?The paper is really confusing me. Any help in clarifying which dye sub ink, and paper is greatly appreciated.
• I was wondering what are some good brands to look at when purchasing a vynil cutter. What are some price ranges for a decent cutter.
• Hi I have a small prob with my vynil cutter.I have the copam 2500 and i have not use it in about 2 years.When eveything is on and it tells me to pick a sheet or roll i pick one and i hit enter...and the cutter part keeps going till it hits the end of the cutter frame and wont stop.I never had this prob befor till now..If anyone can help me out that would be great.Im useing signblazer.
• Has anyone used a Canon 8300 or any other Canon wide format printer for sublimation? If so, is it difficult to convert? What would you suggest the Canon wide format or the Epson 9890? What are the pros and cons? Any help would be much appreciated! Thanks in advance.
• Canon for sublimation ? One of our customers claims to have used a CANON IP4200 for sublimation. They have an Epson sublimation printer, but had a problem with it doing a job late one night, so they took their Canon printer, drilled a hole in the top of the cartridge, removed the inks and put the sublimation inks in.They say it printed perfectly and that they managed to get their job out. I am waiting for a batch of refillable cartridges to come in so I can try it as well, but wondered if anyone
• Dye-sublimating Aluminum License Plates I am attempting to dye-sublimate an aluminum license plate with an image that contains a black background. I have my press set to 390 for 55 seconds and when it is finished pressing and I go to take it off the paper, I am left with ripples in the background. The image is not blurry or distorted, there are merely lighter waves of black in the background. I have tried using fresh paper on top of the image when pressing it, taking the protective layer off the
• Which desktop printer and inks should I buy to start doing dye sublimation on dog tags, license plates, etc Hi everyone, I know there is a lot on here about printers but it"s kind of confusing if you are just starting.What I need to know is a printer and that is good to start with,I want to do dog tags,license plates and tiles.Thanks in advance for your help
• Help needed. Sublimation on Glass Hello I am a newbie in sublimation process. I am planning to purchase a 5 in 1 Combo heat press. I know about mugs but I would like to know if I would be able to sublimate float glass? If i use frost glass or plain glass is its necessary to be sublimate coated? If i used sublimation ink and paper? The thing I am trying to achieve glass photo frame. Please help. I live in country where I am unable to fine digi coat. If anybody can tell me the formula or any chemi
• Glass mug sublimation problem Hello, I am trying to sublimate into glass mug, but there is problem, that some colors are less contrast, it looks like washy, especially yellow is very weak. Red is ok. Is it normal with glass sublimation, or is there any chance how to improve? thanks
• Newbie Question about heat transfer and t-shirt sizes Total newbie - bought a 15x15 standard heat press- bought recommended 11x17 inkjet transfer paper...my question / problem. How do you do larger t-shirts / designs? DO I need a new printer? Bigger sheets of paper? Thanks!
• this is my 4880 printer, i use pe sensor and rear manual insertion sensor for paper...printing with roll paper mode...all off close in settings menu... But paper not right pposition for starting....
• We have a printer based upon Epson 4880. It has been thoroughly repaired, the tapes, head, the motherboard and the dividing board have been replaced. After switching on the printer there appears the message "remove paper", it does not get to the Ready state. Nothing can be done about it. Are there any additional settings that should be done after the replacement of the motherboard? We cannot start the printer.
• Hello I have a printer for printing on garments based on Epson 4880th I tried to rip her a new motherboard with the old settings, but unfortunately during this step the current was turned off and now my printer will not start fully.What should I do to fix it? I used the "Adjustment Wizard" Best regards
• Epson 4880 spoHas anyone had a problem with the spooler not working correctly with thier Epson 4880. I have a hybrid system with sublijet inks and all black. When I try to print from Corel which I have done alot of times, Now Corel says memory full and the spooler keeps shutting down. I have done everything from Rebooting the drivers to rebooting Corel. I also added memory to the computer. Still has the problem. Sometimes it may print half the project then just stop. ???????? HELP!!!!!!!
• 4880 color problem I"m pulling what"s left of my hair out here. I have a brand new 4880 set up with 8 color sublimation. The problem I"m having is that the pressed print is darker than the original and the reds are way over-saturated to the point of almost being washed out.I"m using Photoshop CS3 and the latest ICC profile from Conde. Interestingly, the print on paper before pressing looks better and almost true to the original. Anyone had similar problems. had to cancel another show this weeke
• Hi , I have 3 dtg epson 4880 base , get some issues but always fixed .Today i start to get some lines white white and yellow so after few cleaning i decide to change print head .(i have some new print head in stock in case of clogged , so i just change the print head very quick so my staff not stop production , we clean old print head just a after). So after replace the print head, i perfomed a power cleaning but ink still not come, out, 2 power cleaning idem ...I take off the new print head for
• Problem resetting the 4880 chips I have problems resetting the inkcartage-chips on my Blazer based on a Epson 4880. If i try to resett a chip and it doesn
• set ink problem with epson 4880 I am having problems with my Printex Robo Long DTG using the epson 4880.The LK cartridge will not accept the resetter when I insert the cartridge I get a Set ink cartridge error i have tried ressetting the chip many times and wriggling the cartridge around but no luck. has anyone had this trouble ?
• Color Problem Epson 4880 with Illustrator and Mac I"m new to the forum, so bare with me here. I just bought a new Epson 4880 Standard with Artanium ink cartridges. I"m interfacing this printer with Illustrator CS4 on a Mac OSx to print Automotive cartoon images on t-shirts. I"ve been farming out the actual print process but got tired of the expense/no profit picture and decided to do it myself. This is where you come in. The color on the printer does not match what"s on my screen. I know there h
• Problem with Epson 4880 and ArTanium inkt Hello, We have bought an Epson 4880 with 8 ArTanium inkt cartridges in it. So far so good! But ...Neither the software or the printer indicate the inkt level or give a hint to which cartridge needs to be replaced when it gives the message "ink low" . Does anyone know about this problem or even better ... has a solution? Thanks in advance for any help or information.
• RIP for Epson 4880 I just got myself a Epson Stylus Pro 4880. Any recommendations for a decent and fair priced RIP ? How about the Ulano Powerrip
• Epson 4880 - can it use dye and pigment inks at the same time I have a chance to get a slightly used Epson 4880 or I will end up buying a new Epson 1880. I heard that you can split the Epson 4880 and use 4 of the inks for dye and the other 4 for pigment inks. Anyone know anything about this???? Also...comments on which will be better for sublimation.
• Epson r1800 and epson stylus r2400 I read somewhere that the epson 1280 was being replace with the 5400 or something like that.. and can you do me a big favor before I make the plunge can you check out the web site www.transferbusiness.com and give a looky see and tell me what your opion is please...Now I just seen the epson stylus photo r2400 which is made for pigmented inks but the cartriges are around 14.00 each which is not that bad but do they make a buld inks system for it thanks
• Bulk Ink System for New Epson R1800? I just purchased the new epson r1800 and I"m looking for a bulk ink system but I have heard some systems clog, and others are not worth the trouble so I"m looking for some advice that could possibly help me save a money and time
• Bulk ink System for Epson printer Are these things worth puchasing? If so, does anyone know a good place to order them from. (i will order the ink from TLM supply). Or am i better off just ordering the cartridges?
• Epson 4880 Maintenance Tank Anyone know where to find maintenance tank kits for the epson 4880, kits contain new sponges for tank and resetter...Cost for this? I know you can get them, but cant find it.
• Epson 4800 and maintenance tank? I have finally gotten a maintenance tank almost full indication on the epson 4800. While I await the arrival of a replacement tank, is there any solution to extending the life of the existing tank? In other words, is it possible to partially empty the old tank and continue to use it for awhile?
• Epson 3000 & Epson 4880 Hi , I am switching from laser printing to Epson and I been reading about the different printers and Rips and I got a bit confused. Some articles say Epson 3000 its a working horse other opinions say its so slow that you can drink a cup of coffee in between colors, the Epson 4880 they say its over price and the sales people say its grat. I checked Fast films package and the cost looks a bit high on the Rip part, I also checked Wasatch Soft Rip and is no to clear to me wha
• epson pro 4800 what are the best inks for the epson pro 4800? i"ve been looking but i guess with no luck. i"ve heard of durabrite but its not compatible with the pro 4800? right now i"m using it with ultrachrome inks. which is ok but the colors don"t print out vibrantly. thinking about switching over to a hybrid system, but i"m not impressed with the chromablast inks and papers. so anyone that can give me advice on inks for my printer would be appreciated. thanks
• Epson 4800 printer set-up We are setting up our Epson 4800 printer for the first time. We installed our 8 dye sublimation ink cartridges and it went through the ink charging phase. Now the LCD dispaly is saying "Please Wait" and the pause button is flashing. It has been doing this for 45 minutes. The manual says this process should take 8 minutes. It says the LCD display should say "ready". Why is it taking so long? Any help will be greatly appreciated!! Thanks!
• Hi, After not using my epson 4800 to print dye sub for about 10 days, I found 2 colours not printing more than 20 - 50%. I tried power cleans which helped a bit but not enough. Is there a way to remove the print head to soak it in cleaning solution, or another way to clean the print head? Any and all advice greatly appreciated. Thanks,
• Epson 3000 thinking about picking up an epson 3000 but dont know what type of ink to use for the film. Do it use special ink and will this ink be around for the next couple of yrs since this printer is no longer being manufacutered.
• Heat Transfer Question I"m looking to print a Script style Tshirts - One Mockup Below (Different colour combo"s e.g. White Tshirt black text) I"m looking to invest in a Heat press due to having plans of Tie dying and other pre-printing effects to the tshirts would be a problem with outsourcing screen printing.Question - What would the best transfer be for a high quality non-peel/crack feel/look. Would love some advice. Best wishes!
• epson stylus pro 4800 im looking to buy a new epson stylus pro 4800. i will be using it to make positives for my screen printing. i would also like to know if it would work for heat transfer. i have been reading that durabrite inks is the way to go. this printer comes with Epson UltraChrome K3TM Ink Technology. has anyone tried out this ink for transfers, if so how did it work. i also wondered if i could use durabrite inks for this printer
• New to the forum here, but got a question for all and am hoping I can get some input. We are looking at a photo printer and are considering buying the Epson Stylus Pro 4800 ... anyone have any input on that printer and if it is good for printing photo transfers ?Also, any recommendations on software for working with photos and commenst or recommendations on printer paper to use ?We are planning on mostily using the printer for heat transfers of photographs for merchandise we sell.Thanks in advan
• Hi Folks I have searched but can"t find an answer.Epson 7600 used for sublimation printing on unisub products. Lovely finish, very happy fantastic colours.However the printer was moved to new studio. Ink cartridges removed. Printer had to be turned on end to go through a narrow doorway. Cartridges put back (correct order), printer started up, and what a mess! Air in tubes, ink running down the paper. So Init Fill, air drawn though all looks good, Nozzle check perfect.Problem is now everything ha
• epson 7600 pro just got this printer on a smoking deal and wanna use it for sublimation. can I also use it for printing out my silkscreen proofs. where can get the driver and software for mac
• Epson 4900 Chip Reset. Looking for a good source to find a chip resetter for my Epson Stylus Pro 4900
• How to reset the ink cartridge level on the Epson. Can someone explain to me how to reset the ink cartridge level on an Epson 1280? I am using a CIS from inkjetfly.Any other Epson model users can also share the way they do this process, you never know, this might also work for the 1280. Does this have something to do with the printer model or the CIS model?Thanks in advance for the feedback.
• Color Profiles with Epson 4800 Hi, I"m very interested in find the right color profile using Joto Paper with an Epson Pro 4800. Our company works with heat transfer from 3 years ago. We have 3 printers Epson 4000. And we already found the right settings to get the right color with the Epson 4000. One week ago we buy a new Epson 4800 and the surprise was some colors get out very different from the printer. We need to find a solution ASAP. Please help
• Solvent dye ink VS solvent Pigment ink can anyone tell me.........what is different between solvent dye ink & eco-solvent ink???& also tell me Can we print solvent transfer paper ( forever/ siser solvent dark & light paper ) from solvent dye ink????
• mimaki jv3 160s rip required hi i have a mimaki jv3 160s been looking around for a rip. can any one help.
• Need RIP for Mimaki JV3 160S We have a mimaki JV3 160s and located in the UK. Have looked at a few different RIPs. Wondering if anyone has any good legit copies and dongle if needed up for sale ? Please let me know your thoughts on rips to people
• Mimaki Direct Textile Printer? I was curious what Mimaki direct textile printers are worth looking at?
• Epson 1400 - CISS vs Refillable Cartridge Was wondering if anyone has had experience with both the CISS and Refillable Cartridges in the Epson 1400?I"ve been doing a lot of research and it seems they both have their pros and cons.For instance; the CISS system is easy to fill w/less filling, but I"ve heard nothing but nightmares on the ink no being consistent because the machine wasn"t designed for it.The Refillable cartridges I"ve heard work well depending on the brand but you also have to fill
• Epson 1400 refillable ink or regular ink Okay so I need some help I have a Epson 1400 photo stylus printer and i was using blackmax ink before its kind of pricey $25!- cartridge so we switched to refillable inks i bought the empty cartridges from cis inks and we had photo pigment ink a Ton of them in the garage so we was refilling the ink from there it was hp ink. It was fine for a while, but then it started to act up wouldn"t print as dark then the printer head for clogged I"m replacing it now
• epson 1520 refillable cartridge Hello, is there anyone who knows where can I find empty refillable cartridge for Epson Stylus Color 1520? Thank.
• Where Can I Buy a Refillable Cartridge for an R1800? Does anybody know where I can buy a refillable cartridge for an R1800?I found some on ShopDyeSub.com, but they only have them in a set of 8 on their website, and I just need 1. There is no ph# to call them (which is a red flag for me) and they haven"t answered an email yet.Thanks for any help,
• ask to know t-shirt printing machine price hello everyone, im caeri,want to know the cheapest price there is for t-shirt printing machine
• Good Price for a DTG machine I am looking where to purchase a direct to garment machine. I do not know the real price, can someone supply me with a website or good company"s infor on where to purchase one. I want to step my screen prining ability up a notch.
• [Mimaki GP-604D] question about printing on colored shirts? We just recently purchased a Mimaki GP-604D with discharge capibilities. I was wanting to print on colored shirts, but it don"t seem like the discharge is working right (I don"t think I am doing somthing right though). Everytime I fill the DCG and use it, I can"t really tell that I am bleaching out the shirt. It just shows on the shirt a light mark of what I was wanting to print on the shirt. Would, have thought that it would have bleac
• Is this possible with Dye Sublimation? Can we can ink color lighter than the fabric?Check out this shirt I found at Crazy Shirt. Before we start, yes I know this is a cotton shirt that is not sublimation. I want to do something similar with sublimation.I know the darker print design is no problem. However, is there a way to get the lighter color on there? It seems like it is a blue that is lighter than the garment? Perhaps a grey?Also, any suggestions for a comfy sublimatable shirt? I found vapo
• difference between dye sublimation ink and pigment sublimation ink Is there a difference between dye sublimation ink and pigment sublimation ink using it to sublimate on to coated brass Thanks
• What"s the best direct-to-fabric dye sublimation printer? hi everyone my business is into customizing sportswear apparels. we"re currently using silkscreens but would like to advance into dye-sublimation printing.can anyone help me decide on what direct-to-fabric dye-sub printer to buy? anyone using this kind of printer? is pre-coating still needed to be able to print directly onto 100% polyester fabric?anyone using Roland SP-540VS or d.gen Teleois? or any other brands with such type of printer?
• pigment vs. sublimation ink I am making a homemade DTG machine using an Epson 1280c. My plan is to use a bulk CIS system and pigmented ink to print on 100% and 50/50 blend T-shirts. I need advice:Assuming I have the technical expertise to build the machine: Is this the right choice of ink for printing on white and light colored t"s? Is there a way to print white with the 1280 and where can I learn how? Will the 1280"s print heads function with pigmented ink? Which bulk CIS system would be recomm
• Dye sublimation vs Direct to garment print Can anyone tell me the difference between dye sublimation and direct to garment digital printing? I"m a bit confused as the images they produce seem rather similar.
• Can I use Direct to garment on sublimated fabric? Has anyone tried direct to garment printing on sublimated fabrics? I"ve checked out the Anajet printer website and they seem to be the closest that may be able to do this(especially sounds like their white onto dark is the best). I"ve heard that sublimated fabrics don"t like to be reheated, dtg involves heating but is the temp low enough to make it work. Also if it is doable, would the ink bleed through on the other side? The fabric is 100% polye
• sublimation or pigment ink transfers My assumtions and please correct me if I am off target. I do heatpress vinyl and am very familiar with this process. When printing on transfer paper with sublimation...you heatpress the transfer and completely remove the paper. The only thing transfered is the design to the blank. Problem is I cant use 100% cotton blanks...is this correct? When creating transfer with pigmented inks....I need to cut out the transfer and when pressing, a backing stays on the sh
• Looking to get into Dye Sublimation..Printer Suggestions, among other questiobs Hi Folks!As the title states, I"m looking to get into the Dye Sublimation game, and am looking for suggestions on a printer.What are some good printers at least for someone just entering the sublimation realm?Can a good printer be bought for under or at $1000? Also what else would I need (minus the Heatpress).Also what transfer paper should I look at?Thanks for all the help ahead of time!
• What"s the best dye sublimation printer? Any heat press suggestions? New to the business and seeing what is the best printer to use for full sublimation and regular sub dyes? Also if you could recommend a heat press as well.. Thanks for the help!!
• Dye sublimation printer help! Hello everyone, I am looking for some suggestions on what to do. I was a little weary about doing dye sub but I love it! My issue is I purchased the rich 3300 from Conde it works great but I am finding that the things I want to do to grow my business can"t be printed on this printer. I considered buying the bypass tray but I think that will only help length wise. The gx7000 is a bit pricey for me and I don"t know if the size will fit in my small space. My question i
• Looking for heat press suggestions Hello, I"m just getting into this whole t shirt biz stuff and have yet to make any purchases. I want to learn as much up front while I save the $. I"m looking for recommendations as to what heat press to eventually buy. To start I will be printing strictly on t shirts and selling online part time. What make/model would do a good job and what size is recommended for t shirts and/or sweaters/hoodies? Also, is it relatively simple to print a shirt? Are there any g
• Best Printer for Mug Sublimation? Hi again,I have spent ages looking through the fourms trying to find the best printer to get for mug sublimation.Thus far, I have not found any definate answers to my question on other threads.If anyone can tell me what currently available printer would be the best please let me know.Thanks!
• sublimation printer Has anyone used an Epson 120 for sublimation?
• printer with sublimation ink please help Im using a sublimation in with a CMYK printer. Does anyone know how to adjust the colors when printing the designs? I already change the color mode into cmyk in my photoshop and when i printed the design, the color is not exactly what i saw in photoshop?can anyone help me with this?
• What if I do not have my user"s manual or access to the web,
• What can I do to prevent my print head from clogging?
• Will your ink cause printhead clogging?
• How can I achieve the best printing results with your inks?
• Will your ink cause printhead clogging?
• Do compatible or remanufactured cartridges last as long as OEM cartridges
• What is ICC profile?
• What are sublimation inks?
• How does sublimation ink work?
• What kinds of materials can be sublimated?
• What kind of paper should be used for sublimation printing?
• What kind of printer do I need?
• What fabrics can be sublimated on?
• What are the advantages of dye-sublimation on fabric?
• What temperature is needed for sublimation?
• What size should I prepare my image for printing?
• How long does it take to print a shirt?
• Do the garments need any post treatment after printing?
• How much maintenance is required?
• Can you print on other fabric items besides shirts?
• How many colors will the printer produce?
• Should I use adhesive spray to hold the garment?
• Can I print on sleeves?
• Does direct-to-garment printing cost more on dark shirts?
• How close to the edge of a shirt are you able to print?
• Does direct-to-garment printing cost the same regardless of the number of colors?
• What are three things to look out for when choosing a vinyl cutter?
• I"m trying to find a vinyl cutter that can trim perfectly around my images on heat transfer paper. Can all vinyl cutters do this?
• What is the difference between the 45 and 60 degree blades?
• How do you put t-shirt vinyl into the cutters verse the sign vinyl?
• When do I need to replace my blades?
• What is Laser Cutting?
• What is laser Engraving?
• Why did my laser engraver burn my media?
• Why would I need nitrogen or CO2?
• Why isn"t my laser cutting evenly?
• What materials can I engrave with the laser?
• Can I use sublimation inks on darker substrates/materials?
• Will sublimation work on cotton surfaces?
• How much area does one liter of ink cover?
• How resistant are the sublimation inks to UV fading?
• How to adjust the pressure of 6-in-1 MHP machine?
• What is dye sublimation printing?
• What is CISS?
• How does CISS work?
• What are the benefits of using CISS?
• What fabrics can be sublimated on?
• Which is better, dye ink or pigment ink?
• What is the most important thing to look for in a heat press?
• How can I make sure my press has even pressure?
• I"m trying to find a vinyl cutter that can trim perfectly around my images on heat transfer paper. Can all vinyl cutters do this?
• What is laser cutting and how does it work?
• Why is laser cutting called digital die cutting?
• What does a laser cutting system cost?
• whats the difference between vinly cutters and plotters ? i want to print out small designs Or logos
• Affordable vinyl cutter/printer for t-shirt making?
• Vinyl Cutter/Plotter, what software is needed?
• What kinds of material can be printed on?
• When use for DTG printing
• How direct-to-gament printing works
• The computer fail to order machine to work?
• Engrave randomly?
• No laser beam come out at work?
• The engraving depth is not the same or shallow than order in computer?
• Water temperature is too high in water circulation?
• laser beam come out not continuously?
• Should I use a roll or pouch laminator?
• Why would I need a reverse button in my laminator?
• What is the temperature control for?
• What is the speed control for?
• Which mil thickness is best to use?
• What does it mean if the film is cloudy?
• What does it mean if the film has ripples?
• What does it mean if the film has bubbles?
• Can I use my roll laminator to mount photographs to foam core / board?
• How is the film loaded into the laminator?
• Why would I want cooling fans in my roll laminator?
• How is the lamination film separated from the laminator?
• How long does it take a roll laminator to warm up?
• Why are the rollers not running?
• What is a cold laminator?
• What is a roll laminator?
• The printer can"t detect paper?
• The printer test paper frequently
• The ink drop from the printhead during printing
• The LCD shows ink cut regularly during printing
• The LCD shows that" internal error shut down Bad carriage paper sensor"
• The LCD shows that " internal error shut down carriage axis failure"
• The LCD shows that
• The pictures will show squares and ink cut during printing.
• The colors of the picture transplace when printing
• The LCD show nothing or show something unclear?
• Why the printing width is not enough?
• When the printer is initializing, the ink carriage bump the left side of the machine
• What programs do I need in order to print to an Epson printer?
• What is the difference between an eight color printer and a ten color printer?
• When would I use photo black vs. matte black.